Trajectory Arms gas key with OCKS Screws
Gas key made from 4130 steel
Heat treated
Chrome lined inside bore with .001″ dimensional tolerance for better gas tube fitment and longer lifespan
Phosphate exterior
These come pre-lapped to ensure a flat mating surface with the bolt carrier
OCKS screws by M-Guns
These US Made screws are rated at 170,000 psi tensile strength and have been modified with extra notches along the top edge to allow material from the gas key to better engage with the head after staking.
See what makes our gas keys and other components different
Gas key with OCKS installation procedure:
Clean/degrease surfaces and apply Permatex or Loctite 620 bedding compound around the gas port on bolt carrier.
Oil threads and torque to 58 in/lbs
Stake gas key with a press type staking tool such as the M-Guns MOACKS. Do not use a hammer and punch.
Check bore with a .080″ diameter weed eater line to ensure no sealant has crept into the gas port after installation.
Reviews
There are no reviews yet.